AN Bulkhead Brackets -6AN
Trying to cleanly plumb your Fuel System, Air Ride Suspension, Oil Cooler Lines, or some other AN Plumbing Project on your Car or Truck? These Brackets can help you do a clean and safe job.
HRH AN Bulkhead Brackets accept standard -6AN Bulkhead Fittings, allowing you to connect Hard Lines (Stainless, Aluminum, Copper, etc) to one side and convert to a Flexible Soft Line on the second side (PTFE, Rubber, Vitol, Etc.). Or use between sections of Hard / Soft Lines as a solid tubing mount.
After years of disatisfaction with the available options for connecting Hard Lines to Flex Lines on Custom Car Builds, Alan Mandic, HotRodHippie, designed these brackets and has been using them ever since.
Design:
Constructed of laser cut and press brake bent 5052 Aluminum. Each has 2 holes to accept -6AN Bulkhead fittings side by side for feed and return, or other uses. Has has 3 mounting holes sized for 1/4" or #10 sized bolts/screws. Can accept Bulkhead fittings of various angles. DESIGNED & MADE IN THE USA
Mounting:
These can be screwed to Sheetmetal, Bolted to Frame Rails, or Welded directly to any compatible aluminum components (fuel cell, etc). Brackets can also be cut apart to be used as single hole brackets for solo lines. Bracket width is designed to fit on a 3"(76.2mm) wide frame rail, Can also be mounted inside of a recessed C-channel frame rail on a classic muscle car or pickup truck. Three mounting holes allow for mounting flexibility (2 bolts recommended per bracket.). Excellent for race car, restomod, classic car restoration, street rod, hot rod, or modern street car & truck builds. Great way to mount your Fuel Line Bulkhead Fittings, Air line fittings, or more!
May be able to be use for JIC Hydraulic Fittings as well. Check your fitting dimensions to see if this could meet your needs for a JIC Hydraulic Fitting Mount.
Measurements:
- 2.99" Wide (75.91mm)
- 1.28" Tall (32.47mm)
- .125" Thick (3.20mm) 5052 Aluminum
Note:
These are sold as individual brackets only. No fittings or hardware are included.
Other sizes now available: -3/-4, -8, or a "DIY" size for mixing fittings.
Want to learn more about plumbing Custom Hard Lines on your custom build? Check out THIS video from the HotRodHippie: https://www.youtube.com/watch?v=wayKqBT7z00